ATECO 2007 code — superseded in ATECO 2025
This code was remapped to:
- 25.12.10— Fabbricazione di porte, finestre e loro telai, imposte e cancelli in metallo(unito da più codici)
Recommended INPS scheme:
SEPARATA
Flat-rate scheme (forfettario)
Eligible for the flat-rate scheme?
Yes
Threshold:
€85,000
Profitability coefficient:
67%
Calculate your taxes
Classification
- CATTIVITÀ MANIFATTURIERE
- 25FABBRICAZIONE DI PRODOTTI IN METALLO (ESCLUSI MACCHINARI E ATTREZZATURE)
- 25.1FABBRICAZIONE DI ELEMENTI DA COSTRUZIONE IN METALLO
- 25.12Fabbricazione di porte e finestre in metallo
- 25.12.10Fabbricazione di porte, finestre e loro telai, imposte e cancelli metallici
Frequently asked questions
I make aluminium window frames, iron gates, and wrought-iron doors: ATECO code 25.12.10 or metal structures 25.11.00?
25.12.10 if you produce doors, windows, frames, shutters, and metal gates, including wrought iron. Load-bearing structures, beams, and prefabricated buildings fall under 25.11.00 instead. The distinction is between a window/door unit and a structural building element.
I manufacture metal roller shutters and rolling blinds: should I use 25.12.10 or 25.12.20?
Usually 25.12.20: metal roller shutters, rolling blinds, and insect screens have their own dedicated code, 25.12.20. Code 25.12.10 is reserved for doors, windows, frames, shutters (hinged panels), and gates.
I both manufacture and install aluminium window frames: does installation fall under 25.12.10?
The manufacture of metal window frames is 25.12.10. The installation of frames on site is a construction-related activity with its own code, outside division 25. If you also make metal roller shutters, rolling blinds, or insect screens, the relevant code is 25.12.20.
I make railings, security bars, and balustrades in wrought iron as a blacksmith: 25.12.10 or a structural code?
Usually 25.12.10: the code covers gates and iron bars including wrought iron. Load-bearing structures, beams, and building frames fall under 25.11.00 instead. The key question is whether you are making a window/door element or a structural component of the building.